Skip to main content
  • A SensoGuard invisifence plus sensor next to a scene with a fence and sensors in action with red circles showing the ares they cover.
  • A Comparison chart with standard security systems vs the InvisiFence Plus System
  • Invisifence Plus being used to monitor an area outside a wire fenced perimeter.
  • How the InvisiFence Plus system picks up footstep intrusions.
  • Showing the InvisiFence Plus system being used to monitor a solar farm
  • Advantages of the InvisiFence Plus system
  • Diagram of a typical InvisiFence Plus installation
  • A SensoGuard invisifence plus sensor next to a scene with a fence and sensors in action with red circles showing the ares they cover.

Key Applications

Key Sectors

InvisiFence Plus – Digital Buried Sensor Cable System

The SensoGuard InvisFence Plus is composed of a serial bus line with smart, digital seismic sensors and a processing hub unit. Based on the same technology used to detect earthquakes, the system is completely invisible and tamperproof to intruders.

This fully-digital system eliminates many of the shortcomings of its analogue counterparts: each sensor has its own DSP chip which detects movement and sends the signal to the central hub without the limitations of signal quality decreasing as the cable lengths increase. It eliminates the impact of EMI and RFI noise.

InvisiFence Plus, when correctly installed around your perimeter, will alert you the moment it detects movement, allowing you to take action or automatically trigger security systems you have in place.

Based on the same seismic detection technology as the InvisiFense system, the new InvisiFence Plus adds a great deal to improve on the original analogue design:
√ Each sensor can be configured separately allowing for effective monitoring across differing soil or ground types.
√ Sensitivity adjustments can be made per sensor, via the hub.
√ Each hub detects and locates intrusions over distances of up to 500 metres.
√ Each sensor’s dedicated DSP chip contains our patent-protected smart adaptive algorithm.
√ Can be integrated with existing systems or operate independently.
√ Alerts will pinpoint intrusion to the sensor that detected the movement.
√ Multiple intrusions can be detected and pinpointed.
√ Zero maintenance required
√ Easy installation with plug and play functionality
√ Detection & classification of threats are understood by the DSP chips in each unit. (Digging/footsteps/vehicles)
√ The small form factor aids installation and lowers overall cost as well as shipping.

The InvisiFense Plus boasts the most complete, reliable and configurable buried detection system on the market today.

Enquire about InvisiFence Plus – Digital Buried Sensor Cable System

Features

Fully digital
The digital system allows for more accurate data which can be transmitted much further than analogue signals.

Fully modular
Supplied on a pre-made cable, each sensor is already installed and can be cut to the length the installer requires.

Each sensor has on-board, dedicated processors
Unlike previous versions of the system, this digital design includes a DSP processor on every sensor which can be adjusted via the hub to allow for differing conditions, environments and earth types.

Minimal false alarms
One of the most reliable systems on the planet, the InvisiFence Plus can differentiate between genuine threats such as humans or vehicles and false activations such as wildlife or birds.

Impossible to jump over or dig under
There is no way of avoiding detection by trying to avoid or get around this buried system.

Functionality

The InvisiFence requires no local infrastructure or security systems to be installed. It works in some of the most remote locations on the planet, with the ability to span vast areas and create an invisible detection barrier.

Each ground sensor packs an onboard DSP processor and can be configured and adjusted to allow for sensitivity changes for differing ground types. In turn, this allows for effective monitoring of any given area with minimal false alarms and maximum protection.

The seismic sensors are fully weatherproof, with enclosed cabling which provides a reliable, water-tight seal. Unlike make conventional cabled systems, there are no access points for moisture or weather conditions to enter the system and create reliability issues.

The fully modular design means you can easily adjust the length of cable and amount of sensors required. You can even add additional hubs or set up standalone systems from a single line of sensors.

Above and below ground will be monitored. This detections movement over a perimeter or attempts to get around or underneath the system by digging or tunnelling.

  • Features

    Features

    Fully digital
    The digital system allows for more accurate data which can be transmitted much further than analogue signals.

    Fully modular
    Supplied on a pre-made cable, each sensor is already installed and can be cut to the length the installer requires.

    Each sensor has on-board, dedicated processors
    Unlike previous versions of the system, this digital design includes a DSP processor on every sensor which can be adjusted via the hub to allow for differing conditions, environments and earth types.

    Minimal false alarms
    One of the most reliable systems on the planet, the InvisiFence Plus can differentiate between genuine threats such as humans or vehicles and false activations such as wildlife or birds.

    Impossible to jump over or dig under
    There is no way of avoiding detection by trying to avoid or get around this buried system.

  • Functionality

    Functionality

    The InvisiFence requires no local infrastructure or security systems to be installed. It works in some of the most remote locations on the planet, with the ability to span vast areas and create an invisible detection barrier.

    Each ground sensor packs an onboard DSP processor and can be configured and adjusted to allow for sensitivity changes for differing ground types. In turn, this allows for effective monitoring of any given area with minimal false alarms and maximum protection.

    The seismic sensors are fully weatherproof, with enclosed cabling which provides a reliable, water-tight seal. Unlike make conventional cabled systems, there are no access points for moisture or weather conditions to enter the system and create reliability issues.

    The fully modular design means you can easily adjust the length of cable and amount of sensors required. You can even add additional hubs or set up standalone systems from a single line of sensors.

    Above and below ground will be monitored. This detections movement over a perimeter or attempts to get around or underneath the system by digging or tunnelling.

Enquire about the InvisiFence Plus – Digital Buried Sensor Cable System

Related products