Skip to main content
  • A perimeter fence in woodland with a CU-07 detection system attatched
  • A building detection sensor close up
  • A perimeter fence in woodland with a CU-07 detection system attatched

Key Applications

Key Sectors

CU-07

Remote Location Protection System
  • The CU-07 is a stand-alone perimeter intrusion detection system.
  • Suited to remote locations and unmanned sites.
  • The El-Far CU-07 protects of small sites with a perimeter of up to 800 meters.
  • A single controller will cover up to 800 metres.
  • Patented Vibration Perimeter Fence Sensor technology.
  • the CU-07 uses a Single Chip Microprocessor to detect and verify real intrusion events.
  • This powerful system can eliminate false alarms with a tried and tested extremely low False Alarm Rate (F.A.R.).
  • Intrusion attempts will be pinpointed within a 10-metre area.
  • EL-Far’s InSite software will allow full integration with existing security measures.
  • Can be configured to activate CCTV, security lighting, sirens, alarms and live feeds.
  • Notification will be sent to alert your security staff of any activation scenario.
  • Low power consumption.
  • Easy, fast installation.
  • Zero maintenance requirements.
  • Immune to extreme weather, heat and dust.
  • Complies with Military standards.
  • ATEX level protection for hazardous zones and volatile environments.
Enquire about CU-07

Features

  • Protects perimeters up to 800 meters.
  • Can be installed on any type of existing fence.
  • Battery back-up.
  • Allows manual or automatic sensitivity adjustment according to the protection perimeter characteristics and weather conditions.
  • Allows neutralizing sections without affecting the detection capability of the entire perimeter.
  • Lightning protected.
  • All weather operation.
  • UV-protected sensor line
  • Zero maintenance.

Functionality

The perimeter intrusion detection principle of the CU-07 is based on “Reflected WaveTechnology”.

The CU-07 Control Unit transmits electric pulses into the sensor line. When there is an intrusion attempt (such as heavy impacts, attempted cutting or scaling) along the perimeter, it will be detected by a reflected wave. The time delay between the transmitted and reflected wave will determine the location of the event within 10 meters.

This “RADAR-LIKE” principle of the system simplifies the structure of the system on one hand, and on the other hand provides advantages which, other technologies are unable to meet.

The sensor line, which is composed of only one twisted-pair cable, simplifies the installation and maintenance and is protected by an end-of-line resistor against any tampering with the system.

The CU-07 is a stand-alone system and does not require a central computer to operate. All the control and monitoring are performed via the Control Unit with a simple user interface.

This system provides much more reliable detection capabilities in comparison to conventional (commercial) PIR detectors while also detecting cutting, climbing and attempted intrusions

  • Features

    Features

    • Protects perimeters up to 800 meters.
    • Can be installed on any type of existing fence.
    • Battery back-up.
    • Allows manual or automatic sensitivity adjustment according to the protection perimeter characteristics and weather conditions.
    • Allows neutralizing sections without affecting the detection capability of the entire perimeter.
    • Lightning protected.
    • All weather operation.
    • UV-protected sensor line
    • Zero maintenance.
  • Functionality

    Functionality

    The perimeter intrusion detection principle of the CU-07 is based on “Reflected WaveTechnology”.

    The CU-07 Control Unit transmits electric pulses into the sensor line. When there is an intrusion attempt (such as heavy impacts, attempted cutting or scaling) along the perimeter, it will be detected by a reflected wave. The time delay between the transmitted and reflected wave will determine the location of the event within 10 meters.

    This “RADAR-LIKE” principle of the system simplifies the structure of the system on one hand, and on the other hand provides advantages which, other technologies are unable to meet.

    The sensor line, which is composed of only one twisted-pair cable, simplifies the installation and maintenance and is protected by an end-of-line resistor against any tampering with the system.

    The CU-07 is a stand-alone system and does not require a central computer to operate. All the control and monitoring are performed via the Control Unit with a simple user interface.

    This system provides much more reliable detection capabilities in comparison to conventional (commercial) PIR detectors while also detecting cutting, climbing and attempted intrusions

Enquire about the CU-07

Related products